Caliber: 1-1/2 to 24 inches

Rated pressure: JIS10K ~ 63K, JPI 150-2500, ANSI 150-2500

Temperature range: -196 to 566°C

Materials: carbon steel, Cr-Mo steel, stainless steel, etc

Operator: air - type film, piston cylinder

Accessories: valve positioner, limit switch, solenoid valve, etc

Please refer to the specifications of each model.

A variety of material specifications are available

Provide water, steam, fuel oil and other general use of carbon steel, corrosive fluid control must be highly corrosive stainless steel, resin materials and other body materials products.

Harsh application environment

Sleeve regulating valve is indispensable in the control of high temperature and high differential pressure fluid, and has excellent cavitation resistance. In addition, low noise specifications can be applied to reduce the aerodynamic noise of steam or gas.

Excellent seat leakage performance

It belongs to sealing (V) and soft sealing (VI).

Excellent anti-external leakage performance

A bellows seal may be attached to the stem. This increased demand can be applied to filler specifications that conform to the Fugitive Emission controls of VOC (volatile organic compounds), which have been increasing in demand in recent years.

High control

High control is achieved through the combination of wide adjustable ratio and intelligent valve positioner.

In addition, the unique structure of the valve in the double-seated valve essentially eliminates the weakness of the reverse phenomenon caused by the fluid reaction of the same form of regulating valve, which can realize stable control.